Home / Capabilities

Capabilities · Five product categories

Everything that holds a module to the ground.

Trackers, fixed-tilt mounts, carports, residential systems and the structural steel beneath them — engineered, roll-formed and shipped from a single facility in Rajkot.

01 Trackers

Solar trackers, single and dual axis.

Closed-loop control with backtracking, engineered for table lengths up to 160 metres and high-wind desert terrain.

Horizontal Single-Axis · 1P HSAT 1P

One module in portrait, ±60° tracking range. The workhorse platform for utility-scale flat sites.

Horizontal Single-Axis · 2P HSAT 2P

Two modules in portrait for higher ground coverage and fewer drive lines per megawatt.

Tilted Single-Axis TSAT

Fixed north–south tilt with east–west tracking for higher-latitude and undulating sites.

Agricultural Tracker AGRI

Elevated tables with crop clearance for dual-use agrivoltaic installations.

Dual-Axis Tracker DAT

Full two-axis sun following for research, high-concentration and specialist arrays.

01 · HSAT 1P photo — long-table tracker row at full tilt

±60^°

Tracking range

±1^°

Angular accuracy

160 m

Max table length

02 Fixed mounting

Fixed-tilt mounting, ground and rooftop.

Rigid, low-maintenance structures where simplicity and cost-per-watt matter more than yield gain.

Ground Mount · Fixed Tilt GM-FT

Single- and multi-post tables at a fixed optimum tilt, pile or concrete foundations.

Ground Mount · Seasonal GM-ST

Manually adjustable tilt for summer and winter angles, recovering part of the tracker gain.

Roof Mount · Flat RM-F

Ballasted and anchored systems for industrial flat roofs, with load-spreading feet.

Roof Mount · Inclined RM-I

Rail-on-bracket systems for trapezoidal metal, standing-seam and tiled pitched roofs.

Roof Mount · Non-invasive RM-NI

Penetration-free clamps for standing-seam roofs where the membrane cannot be breached.

02 · GM-FT photo — fixed-tilt ground array, foundation detail

10–35^°

Tilt range

Corrosion class

25 yr

Structural warranty

03 Carports & canopies

Solar carports and canopies.

Generation and shade in one structure — for car parks, logistics yards and public realm.

Cantilever Carport CP-C

Single-sided overhang with one row of columns, clean access and integrated drainage.

Double Cantilever CP-DC

Two-bay back-to-back canopy spanning a double parking run from a central spine.

Tee-form Carport CP-T

Symmetric butterfly section on a single column line for wide, column-light spans.

03 · CP-DC photo — double-cantilever carport over parking

5.5 m

Clear height

2.5°

Drainage fall

Charger-ready

04 Balcony & façade

Balcony, façade and residential.

Compact, tool-light systems for the urban and rooftop segment, finished to be seen.

Balcony Mount BLC

Railing-clamp brackets for plug-in balcony systems, no roof access required.

Façade System FAC

Vertical and inclined wall-mounted rails for building-integrated generation.

Residential Rooftop RES

Lightweight rail kits sized for domestic pitched and flat roofs, fast to install.

04 · FAC photo — façade-mounted modules on a building

<5 kW

Typical system

Anod.

Aluminium finish

Tool-light

Assembly

05 Components

Structural steel components.

The rails, clamps, foundations and hardware we roll-form and supply for our own systems — and for others'.

Rails & Purlins RL

Roll-formed C, Z and top-hat sections in ZN-AL-MG coated steel, cut to length.

Clamps & Brackets CL

Mid- and end-clamps, splices and L-feet in aluminium and stainless steel.

Foundations FD

Driven piles, ground screws and pre-cast footings matched to geotechnical reports.

FRP Walkways FRP

Non-conductive maintenance gratings and walkways for safe O&M access.

Hardware & Fasteners HW

SS-304 and SS-316 bolting, with project-matched torque and corrosion specs.

05 · RL photo — roll-formed rail stock, coated steel

ZM310

ZN-AL-MG coating

SS-316

Fasteners

C2–C6

Corrosion range

Spec baseline

The five platforms, side by side.

Platform	Configuration	Max span / table	Wind design	Standard coating
Solar Trackers	1P / 2P, ±60° single-axis	160 m table	60 m/s	Pre-galv + ZN-AL-MG
Fixed Mounting	Fixed / seasonal tilt 10–35°	6 m post spacing	55 m/s	ZN-AL-MG ZM310
Carports	Cantilever / double / tee-form	12 m clear span	50 m/s	HDG to ISO 1461
Balcony & Façade	Rail, clamp & bracket kits	Per opening	45 m/s	Anodised aluminium
Components	Rails, clamps, foundations	Cut to length	Project-specific	ZN-AL-MG / SS-316

Materials & coatings

Specified for thirty years.

Coastal to inland
C2 through C6

ZN-AL-MG

Zinc-aluminium-magnesium coated steel, supplied as standard. Self-healing at cut edges and far more durable than plain galvanising.

ZM310 · Standard

HDG Steel

Hot-dip galvanised steel to ISO 1461 for carports, heavy sections and where thick sacrificial coating is specified.

≥ 70 µm · ISO 1461

Aluminium

6005-T5 extruded profiles for rails, clamps and façade systems — light, corrosion-free and anodised on request.

6005-T5 · Anodised

Stainless

SS-304 and SS-316 fasteners and fittings, selected by site corrosion class for a maintenance-free joint life.

SS-304 / SS-316

Start a project

Send us a site. Get a structure.

Share a layout, a capacity target or a wind zone. Our engineering desk in Rajkot will come back with a structural option and a budget within one working day.

Request a quote → Browse the range ↑

Solar Trackers

Fixed Mounting

Carports & Urban

Components

320 MW HSAT 1P · Rajasthan

Everything that holds a module to the ground.

Solar trackers, single and dual axis.

Fixed-tilt mounting, ground and rooftop.

Solar carports and canopies.

Balcony, façade and residential.

Structural steel components.

The five platforms, side by side.

Specified for thirty years.

Datasheets & drawings.

Tracker specification sheet — HSAT 1P & 2P

Fixed-tilt & rooftop mounting datasheet

Solar carport & canopy datasheet

Materials & coatings selection guide

Structural design basis & load codes

CAD library — sections & assemblies

Send us a site. Get a structure.